Working w ith the notebook
Wireless LAN / BlueTooth radio components
(device-dependent)
The installation of a radio components not a pproved by F ujitsu Technology
Solutions will invalidate the certifications issued for this device.
Switching the wireless components on and off
Before you switch on your device for the first time, the ON/OFF switch for
radio compo nents must be in the "ON" position.
► Slide the ON/OFF switch into the "ON"
position to activa te the radio components.
Wireless LANWireless LANBluetoothBluetooth
or
► Slide the ON/OFF switch to the
"OFF" position to deactivate the
radio components.
If you switch off
the radio comp onents, t he Bluetooth module and the wireless
LAN transmissi
on unit (antenna) are also switched off.
You c an also deac
tivate the wireless compo nents individually in the BIOS Setup.
To access the BI
OS, you must either not have configured a supervisor password,
or you must kno
w the supervisor password if one exists.
Pay attention t
o the additional safety notes for devices with wireless
components pr
ovided in the "Safety" manual.
Details on usin
g Wireless LAN can be found in the online help system
included in th
e Wireless LAN software.
You can find more
information on how to use Bluetooth on the CD you
received with
your Bluetooth software.
38 Fujitsu Technology S olutions
To Next Page
Loading...
