27
Getting Started
Using the correct procedure to shut down from Windows
allows your notebook to complete its operations and turn
off power in the proper sequence to avoid errors. The
proper sequence is:
1. Click the Start button, and then click Shut Down.
2. Select the Shut Down option from within the
Windows Shut Down dialog box.
3. Click OK to shut down your notebook.
If you are going to store your notebook for a month or
more see Care and Maintenance Section.
CAUTION
Be sure to close all files, exit all applications, and shut
down your operating system prior to turning off the
power. If files are open when you turn the power off,
you will lose any changes that have not been saved,
and may cause disk errors.
B5FH-6611-01EN-00.book Page 27 Thursday, September 26, 2002 11:21 AM
To Next Page
Loading...
