Working with the notebook
Hot key Description
Decrease the brightness of the screen
This hot key decreases the brightness of the screen.
LCDscreenBrightnessofthescreen
Increase the brightness of th
e screen
This hot key increases the bri
ghtness of the screen.
Brightnessofthe screen
Activate energy saving functions*
This hot key activates the Function Manager.
Energysavingf unctions
Switch between display outputs*
Use this hot key to select which screen(s) is/are used for display if an
external monitor is connected.
Screen output is possible:
• only on the notebook’s LCD screen
• on the LCD screen of the notebook and the external monitor at the
same time
• only on the external monitor
This setting is useful if you would like a high resolution and a high
refresh rate on an external monitor.
Fn+F10Switchbetweendi splayoutputs
Bilingual keyb
oard:
Create a scrensho
t
With this hot key
, a screenshot of the current screen image is created and
stored in the cl
ipboard.
Bilingual keyboard:
Enable/Disable virtual number keys
This hot key enables and disables the virtual number keys. Those characters
are issued, which are located at the top right corner of the respective keys.
* These functions do not work while the computer is at a high load.
Function keys
The function keys are the icons on the bottom of the keys.
The function keys are numbered from
F1
up to
F12
.
The function keys serve as short-cut key functions and activate operating
system and/or software functions.
Regardless of the F Lock setting, the function keys are always the primary key functionality:
• until Windows is loaded (after rebooting the system).
Then the primary keys functionality are maintained from the last F Lock setting
prior to reboot (see chapter "
F Lock settings", Page 45).
• when accessing BIOS during POST: If
Fn
+
F2
or
Fn
+
F12
are pressed during boot,
the BIOS menu is not started. You must press the
F2
or
F12
key alone.
44 Fujitsu
To Next Page
Loading...
