Connecting external devices
Connecting USB devices
USBports
On the USB ports you can connect external devices that also have a USB port
(e.g. a DVD drive, a printer, a scanner or a modem).
USB devices are hot-pluggable. This means you can connect and disconnect the
cables of USB devices while the operating system is running.
USB 1.x has a maximum data transfer rate of 12 Mbps.
USB 2.0 has a data transfer rate of up to 480 Mbps.
USB 3.0 has a data transfer rate of up to 5 Gbps.
USB 3.1 Gen 1 has a data transfer rate of up to 5 Gbps.
USB 3.1 Gen 2 has a data transfer rate of up to 10 Gbps.
Additional information can be found in the documentation for the USB devices.
► Connect the data ca
bletothe
external device.
► Connect the data cable to a USB
port of the notebook.
Device drive
rs
USB devices w
ill be automatically recognized and installed by your operating system.
72 Fujitsu
To Next Page
Loading...
