Working with the notebook
Connecting the notebook to the Port Replicator
If you connect the notebook to the Port R eplicator during operation, problems can
occur. We recommend that you switch off the notebook before hand.
The mains adapter must be connected to the Port Re plicator when the
notebook is connected to the Port Rep lica tor.
We recommend that the notebook is not operated with the LCD screen closed when
the notebook is conne cted to the Port Replicator. The resulting overheating can
cause reduced performance a nd increased activity of t h e integrated fan.
PortReplic ato r
► Switch the notebook off.
► Remove the mains plug for the ma
ins adapter from the mains socket.
► Disconnect the mains adapter cable from the DC socket (DC IN) of the notebook.
1
► Position the notebook so that it is in line with the back edge of the Port Rep lica tor.
► Place the notebook onto the Port Replicator (1) and ensure that it locks into place correctly.
Fujitsu Technology Solutions 45
To Next Page
Loading...
