Removing and installing components
during servicing
Removing a cover
► Prepare for remova l, see "Preparing t o remove components" , Page 61.
1
1
2
► R emove the screws (1).
Keep the screws in a safe place. If you are removing more than one component at
the same time, store the screws for the individual components separate fro m each
other. If you install the wrong screws, compo nents may be damaged.
► Lift the cover off t
he notebook (2).
Removing memory modules
3
2
1
1
► Carefully push the two m ounting
clips o utwards (1).
Memoryex
pansion
Memorymo
dule
The memory module snaps upwards (2).
► Pull the memory module out of its slot
in the direction of the arrow (3).
62 Fujitsu Technology S olutions
To Next Page
Loading...
