First-time setup of your device
Switching on the device for the first time
Switchingonforthefirst time
On devices with ON/OFF switch for wireless components: Slide t he ON/OFF switch
for wireless components to the ON position before switching on the device.
When you switch on the device for the first time, the supplied software is
installed and con figured. Because this pro cedure must not be interrupted,
you should se t aside enough time for it to be fully completed and connect
the device to the mains using the mains adapter.
During the installation process, DO NOT restart the device unless
you a re requested to do so!
To make it easier to use y
our device for the first time, the ope rating s y stem
is pre-installed on th
e hard disk.
► Switch on your device.
► During instal
lation, follow the instructions on screen.
If a Windows o
perating system is installed on your device, you will find more
information
on the system and drivers, help programmes, updates, manuals etc.
on the device
or on the Internet at "
http://ts.fujitsu.com/support".
Fujitsu Technology Solutions 17
To Next Page
Loading...
