Working with the noteboo k
Removing and fitting the dust removal cover
(ventilation slot cover)
In orde r to ensure optimum cooling of the components in your notebook, you
should periodically clean the ventilation slot of the heatsink.
This ensures optimum fan performance. You can achieve the best cleaning
results with a small hand-he ld vacuum cleaner.
If necessary, you can also use a dry brush to release dust from the ventilation slots.
Do not u se any cleaning liquids! Ensure that no liquid enters the device.
To avoid overheating of the device, do not remove the ventilation slot
cover when the device is switched on.
► Prepare for removal, see chapter "
Preparing to remove compon ents", Page 62.
1
2
► Press and hold the lock of the ventilation
slot cover (1) and remove it from its slot (2).
► Clean the dust chamber with a dry brush.
1
► Insert the ve
ntilation slot cover into the
slot (1) at an
angle as shown, and ensure
that you feel
it click into place.
► Complete the removal, see chapter
"
Finishin g compon ent remov al", Page 67.
36 Fujitsu Technology Solutions
To Next Page
Loading...
