Working with the noteboo k
Inserting the card
If the device is supplied with a placeholder fitted: Keep the placeholder for the slot
in a safe place. If the card is removed at a later time, you m ust reinsert the place
holder. This preven ts foreign objects from getting into the slot.
1
2
► If the eject button (1) is recessed, press it
once so that it disengages. Now press the
eject button again so that the placeholder
protrudes slig htly from the notebook.
► Pull the card placeholder out of the slot (2).
► Insert the card into the slot guide with
the connection contacts first.
► Gently push the card into the slot either
until it will go no further o r you feel it
engage. Do n ot use excessive force.
Depending on the type, the card may
protrude slightly from the slot.
Please s ee the documentation relating to the card for driver installation inst ructions.
40 Fujitsu Technology Solutions
To Next Page
Loading...
