Working with the notebook
Wireless LAN/BlueTooth/UMTS (optional)
The installation of radio components not approved by Fujitsu Technology S olutions
will invalidate the certifications issued for this device.
Switching the wireless components on and off
Before switching on your device for the first time, the on/off switch for
wireless components must be in the "ON" position.
► Slide the ON/OFF switch into the "ON"
position to activate the wireless components.
WirelessLA NWirelessLA NBluetoothBluetooth
or
► Slide th e ON /OFF switch to the
"OFF" position to deactivate the
wireless components.
The Bluetooth and UMTS modules an d the wireless LAN transmission unit (antenna)
will also be s witched off when you switch off the wireless compone nts.
You can also deactivate the wireless components individually in the BIOS Setup.In
order to be ab le to do this, you will either n eed to know the supervisor password
if one has been assigned, or no password must have been assigned.
Pay attention to the additional safety notes fo r devices with radio components
provided in the "Safety/Regulations" manual.
Details on using Wireless LAN can be found in the online help system
included in the Wireless LAN software.
You can find more information on how to use B luetooth on the CD you
received with your Bluetooth software.
You can obtain more information on UMTS from your service provider.
Fujitsu Technology Solutions 43
To Next Page
Loading...
