Fujitsu LifeBook P772 - Initial Start-Up; Booting the System; Common Indicators; Starting Windows for the First Time

Get Started with your
LIFEBOOK
®
AH532 Notebook
1
2
1 A
ECO
Page 3 of 5
1. Open the Display Panel
■ Ensure that your LIFEBOOK is on a hard level surface and that the air vents are not blocked.
■ Lift the display, being careful not to touch the screen.
■ Adjust the display until it is at a comfortable viewing angle.
2. Connect AC Power
■ Plug the power cord into the AC adapter.
■ Plug the AC adapter into your notebook.
■ Connect the power cord to an electrical outlet.
3. Booting the System
■ We strongly recommend that you not attach any external devices and do not put a DVD/CD
in your drive until you have gone through the initial power on sequence.
■ Press the Power/Suspend/Resume button.
■ The notebook is now on and the battery is being charged.
■ Whenyouturnonyournotebookforthersttime,itwilldisplayaFujitsulogoonthescreen.
If you do nothing the system will load the operating system, and then the Windows Welcome
will begin.
4. Starting Windows
®
for the First Time
■ Afteryoubootupthesystemthersttimeandfollowtheinstructionsonthescreen,youwill
eventually come to the Welcome window. After the Welcome window appears, the screen will
black out for up to several minutes. This is normal. DO NOT ATTEMPT TO POWER DOWN THE
SYSTEM AT THIS POINT.Whilethescreenisblackedout,yoursystemcongurationisbeing
setupandthenecessarylesarebeinginstalled.
■ Duringthecourseoftherststartup,youwillneedtoreadandaccepttheEndUserLicense
Agreements(EULAs)forMicrosoftandFujitsu.
■ ForWindows8Users:
Followingrstboot,youwillarriveattheMetrostartscreen.Someusefulshortcutsforyour
reference:PresstheWindows+DkeytogototraditionalWindowsdesktop.PressWindows+Mkey
to load the traditional Windows desktop and minimize all applications
5. Connect to the Internet or Network
■ Ensure the wireless status indicator is displayed on the taskbar, or-
■ ConnectanEthernetcable(notsupplied)totheLANjackonyournotebookandtoawalljackorto
Ethernetrouter(notincluded).
■ Register your LIFEBOOK with Fujitsu Service and Support via our website (http://solutions.
us.fujitsu.com/www/content/support/). This helps us to better serve you.
6. Activate Additional Utilities, Applications, & Drivers
■ You can launch desktop icon “Fujitsu Bonus Apps” to see if there are any additional application
available for the system. Bonus Apps contains optional applications. You can select individual
or all software that is available. BonusApps will automatically install for you.
7. Create backup media with System Backup and Restore
*
■ Click on the [System Backup and Restore*] icon to create backup recovery media and application discs.
■ LookintheUser’sGuide(TroubleshootingYourLIFEBOOK)formoredetailedinstructions.
*Note: For Windows 7 use myRecovery
8. User’s Guide
■ YourelectronicUser’sGuidecontainsimportantdetailedinformationaboutyournewcomputer.
YoucanaccessyourUser’sGuidebyselectingitsiconfromthetraditionalWindowsdesktop
(YouwillneedtobeconnectedtotheInternet).
Initial Start Up
If you reject the terms of the license agreement you will be asked to review the license agreement for
information on returning Windows
®
or to shut down your NOTEBOOK.
You cannot use your NOTEBOOK until you have accepted the license agreement. If you stop the process your
NOTEBOOK will return to the beginning of the Windows
®
Welcome Process, even if you shut your NOTEBOOK
down and start it up again.
Caution
A Recovery disc (for your pre-loaded factory image) is NOT included with a LIFEBOOK that is shipped with
System Backup and Restore*. If your hard drive crashes or the computer system becomes corrupted, you can
use the recovery discs that you create to restore the system to its original condition. You can also purchase
the recovery Disc from Service and Support by calling 800-8FUJITSU (800-838-5487).
Opening the Display Panel
Power/Suspend/
Resume Button
DC In
AC Cable
AC Adapter
Common Indicators
Status Display Panel
The Status Display Panel is located below the keyboard. The indicators are only
visible when the unit is on. Following are some common indicators.
Power Saving Utility Indicator
The Power Saving Utility indicator glows when the power saving
utility is running. The power saving utility is a special power-saving
mode that is initiated with the ECO button on the application panel.
Hard Drive / Optical Drive Access Indicator
Glows green when y our internal hard drive is being accessed. Note
that ickering is normal.
NumLk Indicator
Shows that the integral keyboard is set in ten-key
numeric keypad mode.