14
Do not hold the system by
the port replicator. The port
replicator does not attach to
the system by any means
other than the interface
connector.
Figure 1. Port Replicator features
6. DC Power Jack
The DC power jack allows you to plug in the
AC Adaptor to power on your notebook.
7. Lift Lever/Lifts
The lift lever on the end of the port replicator
can be used to raise the lifts in order to push
the system up slightly for easier removal.
Note that these lifts do not secure the
system to the port replicator, so do not
attempt to pick up the system using the
port replicator.
8. Interface Connector
The docking port connects the Port
Replicator to your notebook.
9. Release Lever
You can pull out the port replicator lever to
remove your notebook from the port
replicator.
PORT REPLICATOR
The port replicator is an optional item. It may be
bundled in certain country configurations. Please
check with your local distributor.
1. Line-Out Jack
The line-out jack allows you to connect an
external audio device such as an external
speaker.
2. USB 2.0 Ports
The four USB 2.0 ports allow you to connect
Universal Serial Bus devices.
3. LAN (RJ-45) Jack
The LAN port allows you to connect a LAN
(RJ-45) cable. Note that when your notebook
is connected to the Port Replicator, the LAN
port on the system is not accessible; the Port
Replicator LAN port is the only one that can
be used when it is attached to the system.
4. Digital Video Interface (DVI-D)
The DVI-D port allows you to connect a flat-
panel LCD display or television that is
equipped with a DVI-D port for ultra-crisp
digital images and graphics.
5. External Video Port
The external video port allows you to connect
an external CRT monitor or projector.
1
2
3
4
5
2
6
8
7
7
9
To Next Page
Loading...
