91
- Port Replicator
Attaching Port Replicator
To attach the Port Replicator, align the Port Replicator connector on the bottom of your notebook with the
connector on the Port Replicator and push the corners down simultaneously. (Figure 34)
Detaching Port Replicator
To detach the Port Replicator:
1 Pull the Port Replicator’s release latch away from the Port Replicator to release it from your notebook.
(Figure 35)
2 Pull the notebook away from the Port Replicator to detach it from your system. (Figure 36)
Figure 34. Attaching Figure 35. Unlatching Figure 36. Removing
Docking
Connector
Release Latch
To Next Page
Loading...
