Fujitsu Lifebook S710 - Page 10

10
LifeBook S Series BIOS
Drive5 Submenu of the System Menu
The Drive5 submenu allows you to configure secondary ATA devices.
Figure 6. Drive5 Submenu
Exiting from System Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit
menu. If you wish to move to another menu, use the cursor keys.
Table 6: Fields, Options and Defaults for the Drive5 Submenu of the System Menu
Menu Field Options Default Description
Drive5:
■
Disabled
■
Enabled
[Enabled] Enables or disables Drive5, when available.
Type:
---
--- Displays the drive device type in Drive5. This field is for information
only.
Model:
---
--- Displays the model number of the device in Drive5. This field is for
information only. This field is present only when there is a Drive5
device available
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
Item Specific Help
[Disabled]
The drive is disabled.
[Enabled]
The drive is enabled.
Drive5 [None]
Drive5: [Enabled]
Type: None
▲
Phoenix SecureCore(tm) Setup Utility
Info System Advanced Security Boot Exit