Fujitsu Lifebook S710 - Hard Disk Security Submenu of the Security Menu

25
Hard Disk Security Submenu of the Security Menu
The Hard Disk Security submenu is for configuring hard disk security features.
Figure 18. Hard Disk Security Submenu
Table 18: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field Options Default Description
Drive0
Password Is:
___
Clear Display-only. Default is Clear. When the Drive0 Password has been set, the field
changes to Set. When this password is set, the primary hard disk drive cannot be
used in another system unless the password is entered.
Drive1
Password Is:
___
Not Available Display-only. Default is Clear, when available, otherwise it is Not Available. When
the Drive1 Password has been set, the field changes to Set. When this password is
set, the primary hard disk drive cannot be used in another system unless the pass-
word is entered.
Drive4
Password Is:
___
Not Available Display-only. Default is Clear, when available, otherwise it is Not Available. When
the Drive4 Password has been set, the field changes to Set. When this password is
set, the primary hard disk drive cannot be used in another system unless the pass-
word is entered.
Drive5
Password Is:
___
Not Available Display-only. Default is Clear, when available, otherwise it is Not Available. When
the Drive5 Password has been set, the field changes to Set. When this password is
set, the primary hard disk drive cannot be used in another system unless the pass-
word is entered.
Set Drive0
Password
___
[Enter] Sets, changes or cancels the Drive0 Password. The Drive0 Password may be up to
32 characters long and must include only letters or numbers (no symbols). Pass-
words are NOT case-sensitive.
Set Drive1
Password
___
[Enter] Sets, changes or cancels the Drive1 Password. The Drive1 Password may be up to
32 characters long and must include only letters or numbers (no symbols). Pass-
words are NOT case-sensitive.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Item Specific HelpHard Disk Security
Drive0 Password Is: Clear
Drive1 Password Is: Not Available
Drive4 Password Is: Not Available
Drive5 Password Is: Not Available
Set Drive0 Password [Enter]
Set Drive1 Password [Enter]
Set Drive4 Password [Enter]
Set Drive5 Password [Enter]
Password Entry on Boot: [Enabled]
Phoenix SecureCore(tm) Setup Utility
Info System Advanced Security Boot Exit
Security Menu