83
-
E-SATA Port
Port Replicator Connector
The port replicator connector is used for the connection of your notebook to an optional port replicator. In
order to connect your notebook to this device, follow the instructions that came with your port replicator.
E-SATA (External Serial Advanced Technology
Attachment) is an external version of SATA, which
connects your computer to the hard drive. E-SATA is
ideal for backing up large files on an external hard drive.
To connect an E-SATA device:
1 Align the connector with the port opening.
2 Push the connector into the port until it is seated.
Figure 28. E-SATA Connection
To Next Page
Loading...
