Connecting external devices
Connecting an external SATA hard disk (eSATA)
An extern al SATA hard disk c an be connected at the eSATA port. This allows you
to expand the internal hard disk capacity as you wish.
The length of the eSATA cable must not exceed 2 metres. Consult a specialist
dealer for advice on which eSATA data cable is suitable for your external eSATA
hard disk. Make sure that the hard disk has its o wn external power supply.
The data transfer rate is up to 2,400 Mbit/s.
eSATA
► Connect the data cable to t he external
device.
► Connect the data cable to the eSATA port.
Device drivers
The eSATA hard disk is autom atically recognised by your operating system and installed.
You will find more information in the documentation fo r the external S ATA
hard disk and the operating system.
Safe removal of eSATA and USB devices
Always corre
ctly remove the device according to the rules described below,
to ensure tha
t none of your data is lost.
► Left-click on the symbol to remove hardware safely.
► Select the
device you wish to shut down and remove.
► Press the "Enter" key.
Wait for t
he dialogue box which tells you that it is now safe to remove the device .
66 Fujitsu Tech nology Solutions
Downloaded from LpManual.com Manuals
To Next Page
Loading...
