Fujitsu Lifebook S751 - Removing a Cover; Removing Memory Modules

Removing and installing components
during servicing
Removing a cover
1
2
► Remove the screw (1).
Keep the screws in a safe place. If you are removing more than one component at
the same time, store the screws for the individual com ponents separate from each
other. If you install the wrong screws, components may be damaged.
► Lift the cover off the notebook (2).
Removing memory modules
3
2
1
1
► Carefully push the two mounting
clips o utwards (1).
MemoryexpansionMemorymodule

The memory module snaps upwa rds (2).
► Pull the memory module out of its slot
in the direction of the arrow (3).
70 Fujitsu Tech nology Solutions
Downloaded from LpManual.com Manuals