150
Wireless Network Considerations
• The WLAN device supports IEEE802.11a (infrastructure mode only), IEEE802.11b, IEEE802.11g,
and IEEE802.11n.
• The WLAN device operates in the 2.4 GHz ISM band and the 5 GHz lower, middle, and upper UNII
bands.
• Microwave ovens may interfere with the operation of WLAN devices since they operate in the same
2.4 GHz frequency range as IEEE802.11b/g/n devices. Interference by microwaves does not occur
with IEEE802.11a radio which operates in the 5 GHz RF band.
• Wireless devices that transmit in the 2.4 GHz range may interfere with operation of WLAN devices
in IEEE802.11b/g/n modes. Symptoms of interference include reduced throughput, intermittent
disconnects, and many frame errors. It is HIGHLY recommended that these interfering devices be
powered off to ensure proper operation of the WLAN device.
Deactivating/Disconnecting the WLAN Device
Deactivation of the WLAN device may be desired in certain circumstances (to extend battery life) or
where certain environments require it (i.e. hospitals, clinics, airplanes, etc.).
BEFORE USING THE WIRELESS LAN DEVICE, YOU MUST FIRST INSTALL CLICKME! TO ENSURE THAT
THE CORRECT SOFTWARE FOR YOUR DEVICE IS INSTALLED. SEE “SEVERAL ADDITIONAL WINDOWS WILL
APPEAR, PROMPTING YOU TO ENTER A NAME AND DESCRIPTION FOR YOUR COMPUTER, AN
A
DMINISTRATOR PASSWORD, AND A DOMAIN NAME. READ THE INSTRUCTIONS ON THE SCREENS
CAREFULLY AND FILL IN THE INFORMATION AS DIRECTED. ONCE YOU HAVE PFINISHED WITH THE SETUP,
IT IS VERY IMPORTANT THAT YOU INSTALL CLICKME!, AS DETAILED BELOW.” ON PAGE 50.
To Next Page
Loading...
