First-time setup of your device
First-time setup of your devic
e
First- time setu pGettingstarted
Please read the chapter "Important notes", Page 6.
If your device is equipped with a Windows operating system, the necessary
hardware drivers and supplied software are already p re-installed.
Before you switch on the device for the first time, conn ect it t o the ma ins voltage
using the mains adapter, see "
Mains adapter connecting", Page 11.Themains
adapter must be connected during the entire insta llation process.
A system test is performed w hen your device is first switched on. Various messages
can appear. The display may remain dark for a s hort time or may flicker.
Please follow th e instructions on the screen.
NEVER switch off your device during the first-time setup process.
On delivery, the battery can be found in the battery compartment or in the accessories kit.
The battery must be charged if you want to operate your device using the b attery.
When used on the m ove, the built-in battery provides the device with the necessary power. You
can increase the ope rating time by using the available energy-saving functions.
For instructions on how to connect external devices (e.g. mouse, printer) to your
device, please refer to the operating manual for your device.
Unpacking and checking the d
evice
Should you d iscover any damage that occu rred during transportation,
notify your local sales outlet immediately!
► Unpack all the individual parts.
PackagingTransport
► Check your device for any visible damag e which may have occurred during transportation.
You may need the packag ing in the future, if you need to transport your device.
16 Fujitsu Technology Solutions
To Next Page
Loading...
