First-time setup of your device
Switching on the device for the first time
Switchingonforthefirst time
On devices with O N/O FF switch for wireless com ponents: Slide the ON/O FF switch
for wireless components to the O N position before switching on the device.
When you switch on th e device for the first time, the s upplied software is
installed and configured. Because this procedure must not be interrupted,
you should set a side enough time for it to be fully completed and connect
the device to the mains using the mains adapter.
During the installation process, DO NOT restart the device unless
you are requested to do so!
To m ake it easier to use your de
vice for the first time, the operating s ystem
is p re-installed on the hard
disk.
► Switch on your device.
► During installation, follow the instructions on screen.
If a W indows operating system is installed on your device, you will find more
information on the system and drivers, help programmes, updates, manuals etc.
on the device or on th e Internet at "
http://ts.fujitsu.com/support".
18 Fujitsu Technology Solutions
To Next Page
Loading...
