Working with t he notebook
Removing and fitting the dust removal cover
(ventilation slot cover)
In order to ensure optimum cooling of the compo nents in your noteb ook, you
should periodically clean the ventilation slot of t he heatsink.
This will ensure the optimum functionality of the fan. T he best way to clean
the c over is to use a small handheld suction cleaner.
If necessary, you can also use a dry brush to release dust from the ventilation slots.
Be sure that you do not damage the ventilation blades in the process. Do
not use any abra sives for cleaning purposes.
► Prepare for removal, see chapter "
Prep aring to remove components", Page 64.
1
2
► Press on the clip of the dust chamber
cover (1) and remove it from its
installation location (2).
► Clean the dust chamber with a dry brush.
1
► Insert the dust ch a m
ber cover into the slot
(1) at an angle, as sh
own, and make sure
that you feel it cli
ck into place.
► Complete the removal, see chapter
"
Finishing component removal", Page 70.
Fujitsu Technology Solutions 39
To Next Page
Loading...
