Connecting external d evices
Connecting an external SATA hard disk (eSATA)
The no tebook itself does not have an eSATA port. The optional Port R eplicator
available for your notebook provides this port.
An external SATA hard disk c an be connected at the eSATA port. This allows you
to expand the internal hard disk capacity as you wish.
The length of the eSATA cable must not exceed 2 metres. Consult a specialist
dealer for advice on which eSATA data cable is suitable for your external eSATA
hard disk. Ma ke sure that the hard disk has its o wn external power supply.
The data transfer rate is up to 2,400 Mbit/s.
eSATA
► Connect the data cable to the external
device.
► Connect the data cable to the eSATA po rt.
Device driverThe eSATA hard disk is automatically recognised b y
your operating system and installed.
You will find more information in the documentation for the extern al SATA
hard disk and the operating system.
Safe removal of eSATA and USB devices
Always correctly
remove the device according to the rules described below,
to ensure that non
e of your data is lost.
► Left-click on the symbol to remove hardware safely.
► Select the device which you want to shut down and remove.
► Press the "Ente r" key.
Wait for the dialogue box which tells you that it is now safe to remove the device.
66 Fujitsu Technology Solutions
To Next Page
Loading...
