21
- Locating the Controls and Connectors
Flexible Bay Device Lock
The flexible bay device lock is used to lock and release a modular flexible bay device in the flexible bay.
See “Flexible Bay Devices” on page 38.
Port Replicator Connector
This connector allows you to connect the optional Port Replicator to your Tablet PC.
Battery Release Latches
The battery release latches are used to lock and release the battery in the battery bay. See “Lithium ion
Battery” on page 65.
Lithium ion Battery Pack
The battery bay contains the internal Lithium ion battery pack. It can be unlatched for the removal of the
battery when stored over a long period of time or for swapping a discharged battery with a charged
Lithium ion battery. See “Lithium ion Battery” on page 65.
Dust Filter Cover
The dust filter cover is used to help prevent dust and dirt from entering your system. (See “Cleaning the
dust filter” on page 120).
Air Vents
The air vents allow air to circulate through the system to cool down the components.
TO PROTECT YOUR NOTEBOOK FROM DAMAGE AND TO OPTIMIZE SYSTEM PERFORMANCE, BE SURE TO
KEEP ALL AIR ALL VENTS UNOBSTRUCTED, CLEAN, AND CLEAR OF DEBRIS. THIS MAY REQUIRE
PERIODIC CLEANING, DEPENDING UPON THE ENVIRONMENT IN WHICH THE SYSTEM IS USED.
D
O NOT OPERATE THE NOTEBOOK IN AREAS WHERE THE AIR VENTS CAN BE OBSTRUCTED, SUCH AS IN
TIGHT ENCLOSURES OR ON SOFT SURFACES LIKE A BED OR CUSHION.
To Next Page
Loading...
