42
- LifeBook Security/Application Panel
Setting Supervisor Password
You must have set a supervisor password before setting any user passwords. The supervisor password can
bypass the user password. Depending upon your operating system, use the appropriate procedure below.
Windows XP:
1 Go to the Start menu.
2 Click on Run.
3 Type in:
C:\Program Files\Fujitsu\Security Panel Application\Supervisor\FJSECS.EXE, then
press [Enter]
4 Follow the on-screen instructions to set the Supervisor password.
Windows Vista and Windows 7:
1 Go to the Start menu.
2 Select All Programs.
3 Select Accessories, then select Run.
4 Type in:
C:\Program Files\Fujitsu\Security Panel Application\Supervisor\FJSECS.EXE, then
press [Enter]
5 Follow the on-screen instructions to set the Supervisor password.
Setting User Password
1 Go to the Start menu.
2 Click on Programs (or All Programs).
3 Click on Security Panel Application and Set User Password.
4 Follow the on-screen instructions to set the user password.
YOU MAY CHANGE OR REMOVE THE SUPERVISOR OR USER PASSWORD BY REPEATING THE STEPS
DEFINED ABOVE.
To Next Page
Loading...
