Fujitsu LifeBook S762 - Setting Supervisor Password; Setting User Password

39 - LIFEBOOK Security/Application Panel
Setting Supervisor Password
You must have set a supervisor password before setting any user passwords. The supervisor password can bypass the
user password. Depending upon your operating system, use the appropriate procedure below.
Windows 7:
1 Go to the Start menu.
2 Select All Programs.
3 Select Accessories, then select Run.
4 Type in: C:\Program Files\Fujitsu\Security Panel
Application\Supervisor\FJSECS.EXE, then press [Enter]
5 Follow the on-screen instructions to set the Supervisor password.
Windows 8:
1 Go to start screen
2 Right click on start screen
3 Click "All Apps", then select "Run" from the list
4 Type in: C:\Program Files\Fujitsu\Security Panel
Application\Supervisor\FJSECS.EXE, then press [Enter]
5 Follow the on-screen instructions to set the Supervisor password.
Setting User Password
Windows 7:
1 Go to the Start menu and select All Programs.
2 Select Security Panel Application and Set User Password.
3 Follow instructions to set the user password.
Windows 8:
1 Go to start screen
2 Right click on start screen