66
- Optical Drive
Using the Media Player Software
Starting a DVD Movie
1 Insert the DVD into the optical drive of the notebook. If the CD AutoRun feature activates, skip Step 2.
2 The first time you insert a movie into the DVD/CD-RW tray, you will be prompted to select what you want the
system to do when discs are inserted (e.g., start automatically or wait for a prompt). Until you make a selection,
you will receive the same prompt whenever you insert a disc.
3 Click OK to close the About DVD Player Performance dialog box and the movie will begin.
Emergency Optical Drive Tray Release
If for some reason the eject button fails, you can open the
media tray with a paper clip or similar tool inserted into
the eject hole in the right side of the front of the tray as
shown in Figure . Straighten one side of a paper clip and
push it gently into the hole. The tray will pop out.
This procedure will work whether the system is running or
not.
Figure 31. Emergency Tray Release
D
EPENDING UPON ITS CONFIGURATION, YOUR SYSTEM MAY NOT HAVE THE MEDIA PLAYER SOFTWARE PRE-INSTALLED. IF IT IS NOT INSTALLED,
REFERENCE THE DOCUMENTATION THAT ACCOMPANIES THE MEDIA APPLICATION.
To Next Page
Loading...
