79
- Device Ports
External Video Port
Microphone/Line-In Jack
The microphone/line-in jack allows you to connect an external mono microphone. Your microphone must be
equipped with a 1/8”(3.5 mm) mono mini-plug in order to fit into the microphone jack of your notebook. In order to
connect a microphone follow these easy steps:
1 Align the connector with the port opening.
2 Push the connector into the port until it is seated.
The external video port allows you to connect an
external monitor or LCD projector. In order to
connect an external video device, follow these
easy steps:
1 Align the connector with the port opening.
2 Push the connector into the port until it is
seated.
3 Tighten the two hold-down screws, located on
each end of the connector.
Figure 40. Connecting an External Video Device
WHEN AN EXTERNAL MONITOR IS PLUGGED IN, PRESSING THE [FN] + [F10] KEYS ALLOWS YOU TO CHANGE YOUR SELECTION OF WHERE TO SEND
YOUR DISPLAY VIDEO. EACH TIME YOU PRESS THE KEY COMBINATION, YOU WILL STEP TO THE NEXT CHOICE. THE CHOICES, IN ORDER, ARE: BUILT-IN
DISPLAY PANEL ONLY, EXTERNAL MONITOR ONLY, BOTH BUILT-IN DISPLAY PANEL AND EXTERNAL MONITOR, HDMI DISPLAY, AND BOTH LCD AND
HDMI. N
OTE THAT DEPENDING UPON SYSTEM CONFIGURATION, ALL OF THESE STEPS MAY NOT BE AVAILABLE.
To Next Page
Loading...
