Fujitsu Lifebook S904 - Hard Disk and Boot Protection

Working with the no tebook
► Press on the no tebook at the position denoted (2) to m ake sure that it
engages into the Port Replicator.
Connecting the mains a dapter
to the Port Replicator
3
1
2
► Connect the power cable to t he
mains adapter (1).
► Plug the power cable into t
he mains
socket (2).
► Connect the m ains adapter c able to the D C
jack (DC IN) of the Port Replicator (3).
When the notebook is connected to a Port Replicator, the operating system creates
a hardware profile for the "Docked" mode. In this profile, for example, the setting is
saved as to which monitor was last used for output. This pro file will be loaded, as
soon as the notebook is connected to a Port Replicator of the same type.
Switching on the notebook via the port replicator
► Press the ON/
OFF switch on the port
replicator t
o switch the notebook on.

The power-on indicator of the Port
Replicator lights up .
48 Fujitsu