Troubl esho ot ing and tips
The notebook stops working
NotebookEnergys avingmode
Cause Troubleshootin g
Notebook is in energy saving mo
de.
► Leave energy saving mode.
An application programme has
caused the
malfunction.
► Close th e application program or restart
the noteb ook (by restarting the operating
system or sw itching the device off and back
on again).
The battery is dead.
► C harge th e battery.
or
► Insert a charged battery.
or
► Connect the mains adapt
er to the
notebook.
The printer does n ot print
Printerdoe s notp
rint
Cause Troubleshootin g
The printer is not switched on. ► M ake sure that the printer is switched
on and ready for operation (refer to the
documentation s upplied with the printer).
The printer is not connected correctly.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
The printer driver is fa ulty o r n ot c orrectly
installed, or it is the wrong printer driver.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
► Check whethe
r the correct printer driver is
loaded (ref
er to the printer documentation).
The radio connection to a network does not work
Theradi
oconnect i ontoa network doesnot w ork
Cause Troubleshootin g
The wireless component is disa bled.
► Switch the radio component on (see
"
Switch ing the wi reless components on and
off", Page 44).
The w ireless component is enabled. Despite
this, the wireless c onnection to a network does
not work.
► Check w hether th e radio connection is
switched on via the software.
► Furthe
r information on using the radio
compo
nent can be found in the help files.
Fujitsu 75
To Next Page
Loading...
