Security functions
Trusted Platform Module (TPM) (device-dependent)
TPMTrustedPla tformModule
To use the T PM, you must activate the TPM in the BIOS Setup before the software
is installed. The condition for this is that you have assigned at least the supervisor
HDD password (see "
Securit y functions", Pag e 52).
Enabling TPM
• Requirement: You have set a supervisor password, see "Security functi ons", Page 52.
► Call up the BIO S Setup an
d select the Security menu.
► Mark the TPM S ecurity Chip Setting field and press the Enter key.
► Select Enabled to acti
vate the TPM.
Once you have activated the TPM the Clear Security Chip op tion appears.
Select Clear Securit
yChipto delete the h older in the T PM. By clicking o n Enabled,
all secret keys (e.g
. SRK - Storage Root Keys, AIK - Attestation Identity Keys
etc.) generated by
applications are deleted.
Please note that y o
u will then no longer be able to access the data you have
encrypted with th
e keys based on that holder.
► Select the Exit Sa
ving Changes option in the Exit menu.
► Press the Enter key and select Yes.
The notebook wil
l r esta rt, and TPM will be enabled after th e reboot.
Disabling TPM
• Requirement: You have set a supervisor password, see "Security functi ons", Page 52.
► Call up the BIO S Setup and select the Security menu.
► Mark the TPM S ecurity Chip Setting field and press the Enter key.
► Select Disabled to deactivate the TPM.
► Fr om the Exit menu, choose the option Exit Saving Changes.
► Press the Enter key and select Yes.
Yo ur notebook w ill now restart and TPM will be disabled.
Fujitsu 59
To Next Page
Loading...
