Settings in BIOS Setup Utility
Settings in BIOS Setup Utility
BIOSSetupUtilitySystemsettings,BIOSSe tup UtilityConfiguration,BIOS SetupUtilitySetupSystem configurationHardwareconfiguration
The BIOS Setu p Utility allows you to set the system functions and the hard ware
configuration for the notebook.
When it is delivered, the notebook is set to factory default settings. You can
change these settings in BIOS Setup Utility. Any changes you make take effect as
soon as you save and exit the BIOS Setup U tility.
The BIOS Setu p Utility program contains the following menus:
About
Displays information relating to the BIOS, processor and notebook
System
Advanced system settings
Advanced
Configuration of various hardware components, such as mouse, keyboard,
processor
Security
Password settings and security functions
Boot
Configuration of the start-up sequence
Exit
Exits the BIOS Setup Utility
Starting the BIOS Setup Utility
► Reboot the note
book (switch off/on or reboot the operating system).
BIOSSetupUtility
► Press and hold function key
F2
.
► If a password
has been assigned, enter the password and press the Enter key.
If you have fo
rgotten the password, contact your system administrator
or contact o
ur customer service centre.
The BIOS Setup Utility starts.
Operating BIOS Setup Utility
BIOSSetupUtility
Press the
F1
key to display help on the operation of the BIOS Setup Utility. The description
of the individual settings is shown in the right-hand windo w of the BIOS Setup Utility.
With the
F9
key you can load the default settings of the BIOS Setup Utility.
► Use the cursor keys
←
or
→
to select the menu you wish to access to make changes.
The menu is displayed on the screen.
► Select the option you want to change with the cursor keys
↑
or
↓
.
► Press th e Enter k ey.
► Press the
ESC
key to exit the selected menu.
► For future reference, m ake a n ote of the change s you have m ade (for example, in this manual).
Fujitsu 71
To Next Page
Loading...
