24
LifeBook T Series Tablet PC
Hard Disk Security Submenu of the Security Menu
The Hard Disk Security Submenu is for configuring hard disk security features.
Figure 14. Hard Disk Security Submenu
Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field Options Default Description
Note that when a Master Password is set for a hard disk drive, the hard disk drive will only function in a system that has the
same hard disk drive password. If the drive is put into another system with no password or with a different password, the hard
disk drive will not work. Note, however, that the data on the drive is not encrypted.
Drive0 Clear ----- Display only. Either Clear or Set, depending upon whether a Master
Password is entered for Drive0 in the following field.
Set Master Password ----- Enter Allows you to enter a master password when a supervisor password has
been set.
Set User Password ----- Enter Allows you to enter a user password when a supervisor password has
been set.
Drive1: --- --- A display-only field. Not Available is displayed.
Set Master Password --- Enter
Set User Password --- Enter
Password Entry on
Boot:
■
Disabled
■
Enabled
[Enabled] When disabled, it is not necessary to enter the password before boot-
ing.The hard disk is still password-protected without entering password.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Main Advanced Security Power Savings Exit
Item Specific Help
PhoenixBIOS Setup Utility
Hard Disk Security
Drive0: Clear
Set Master Password: [Enter]
Set User Password [Enter]
Drive1: Not Available
Set Master Password [Enter]
Set User Password [Enter]
Password Entry on Boot: [Enabled]
To Next Page
Loading...
