48
- Touchpad/Active Digitizer/Touchscreen
Clicking on Active Digitizer Display
To left-click, touch the object you wish to select and
then lift the stylus tip immediately.
Figure 26. Clicking on the Active Digitizer Display
Figure 27. Right-clicking Active Digitizer
Right-Clicking on Active Digitizer
Right-click can be accomplished by holding the
front of the toggle button down while tapping on
the screen. To change the settings for the right-
click feature, go to Start -> Control Panel -> Pen
and Input Devices. In the Pen Options tab, select
“Press and Hold” then click the [Settings]
button.
Chaldea Comm T4410.book Page 48 Wednesday, September 16, 2009 9:36 AM
To Next Page
Loading...
