First-time setup of your device
Choosealocation
Choosea l ocationSetupAC adapter
Choose a suitable location for the device before setting it up. In doing
so, please follow these instructions:
• Never place the device or the AC adapter on a heat -sensitive surface.
The surface could be damaged as a result.
• Never place the device on a soft surface (e.g. carpeting, upholstered furniture,
bed). T his can block the air vents and cause overheating and damage .
• The u nderside of the device heats u p during normal operation. Prolonged contact
with the skin can become unpleasant or even re sult in burns.
• Place the device on a stable, flat, non-slippery surface. P lease note that the
rubber feet of the device may mark certain types of delicate surfa ces.
• Keep other objects at least 100 mm / 3.97 inches away from the device
and its AC adapter to ensure adequate ventilation.
• Never cover the ventilation openings of the device.
• Do not expose the device to extreme environmental conditions.
Protect the device against dust, humidity and heat.
Connecting the A C adapter
MakingreadytouseACadapter
Observe the safety notes in the enclosed "Safety/Regulations" manual.
The s upplied AC cable conforms to the requirements of the country in wh ich
you purchased your device. Make sure that the AC cable is approved for
use in the co untry in which you intend to use it.
3
1
2
► Connect the AC cable (1) to the AC adapter.
► Plug the AC cable (2) into a power outlet.
► Connect the AC adapter cable (3) to the
DC jack (DC IN) of the device.
Fujitsu 19
To Next Page
Loading...
