Working with the noteboo k
Replacing the pen tip
With use, th e pen tip may b ecome worn or may pick up foreign particles that can scratch the screen.
A damaged or worn tip may not move freely, causing unpredictable results when using the pen.
If problems like these occur with your pen, you should replace the pen tip. To do
this, use the pen tip removal tool included with your pen.
1
1
1
► Position the tip in the gap bet ween the two
ends of the tool to remove the tip.
► Pinch the two ends of the tip changer
together so that the tip is firmly clasped (1),
then pull it from the barrel.
► Use one of the new tips that were supplied
with your pen to replace the tip. Insert
the flat end of the tip into the barrel and
push it in firmly until it is in place.
Do not continue to use a tip wh ich is worn or damaged.
Installing a pen cord
You should a ttach the pen with a pen cord to prevent accidentally dropping or losing it.
► Attach the e n d o f the pen cord with the smaller loop to your pen .
► Attach the end of the pen cord with the larg er loop to your no tebook.
40 Fujitsu Technology Solutions
Downloaded from LpManual.com Manuals
To Next Page
Loading...
