Removing and installing com ponents
during servicing
Removing and installing the har
ddisk
Removing a cover
• Requirement: The dust chamber cover is removed, see "Re moving and fitting the
dust removal cover (ventilation slot cover)", Pa ge 63.
1
2
1
► Remove the screws (1).
Keep the screws in a safe place. If you are removing more than one componen t at
the same time, store the screws for t he individual components separate from each
other. If you install the wrong screws, components may be damaged.
► Slide th e cover in the direction of the arrow (2), and lift it away from the notebook.
94 Fujitsu Technology Solutions
Downloaded from LpManual.com Manuals
To Next Page
Loading...
