Troubleshooting and tips
Restoring the hard disk content
s under Windows
Harddisk:Operatingsystem,restoring
You can reset your device to the factory defaults (software) using the Fujitsu recovery solution (hard
disk-based recovery). For further information, please see the Fujitsu Recovery Solution manual.
Alternatively, you can use the "Windows Recovery CD" (optionally available) and the
"Drivers & Utilities CD/DVD" to re-install the operating system.
The instructions are provided on the case o f the Recovery CD.
During the reinstall process your perso nal files and any installed programs
will be deleted. We advise you to backup your files to an external hard
drive, or CD / DVD disk before you start.
► Switch the notebook on.
The following display b
riefly appears on the screen during start-up:
<ESC>Diagnostic screen <F12>Boot Menu <F2>BIOS Setup
► When this message appears, press the function key
F12
.
► In ser t the "W indo ws
Recovery CD" into the optica l drive.
► Select CD-ROM and press the Enter key.
► Follow the inst ruc
tions on the screen.
After the installation you must install all the drivers again. S ome installed hardware
components will not be correctly supported until this has been done.
► Insert the "Drive rs & Utilities" CD/DVD into the optical drive. The CD starts automatically.
► Click on the Des
k Update button.
► Select Automatic driver installation (Express) and click on Start insta lla tion.
► Follow the ins
tructions on the screen.
► R esta rt your notebook when the driver installation is completed.
The notebook’s date or time is incorrect
SummertimeTime,daylights avingsTimenotcorrec tTimeno tcorrectInco rrect date /timeDateisincorrectBufferbattery,load
Cause Troubleshooting
Time a nd date are incorrect. ► Wi th the BI OS -Setup-Utility, you can set the
date and time in the main menu.
If the tim
e and date are still set incorrectly aft er
switchin
g on the notebook.
► Please contact your sales outlet or our
Hotline/Service Desk.
106 Fujitsu Technology Solutions
To Next Page
Loading...
