Working with the no tebook
Optional wireless LAN / Bluetooth / 4G
wireless componen ts
The installation of ra dio c omponen ts not approved by Fujitsu will invalidate
the certifications issued for this device.
Depending on th e device config uration you ord ered, your device will be
equipped with wireless LAN , Bluetooth and/or 4G.
Switching the wireless components on and off
Before switching on
your device for the first time, the on/off button for
radio components mu
st be in the "ON" position.
► Slide the ON/OFF button into the "O N"
position to activate the radio comp onents.
wireless LANwireless LANBluetoothBluetooth
or
► Slide the ON/OFF button to the
"OFF" position to d eact ivate the
radio components.
If you switch off th e radio components, the wireless LAN antenna and, when present,
the Bluetoo th module a n d 4G/LTE module will be switched off.
You can also deactivate the wireless components individua lly in th e BIOS Setup.For
this to occur, you must either not ha ve assigned a supervisor HDD pa ssword o r if a
supervisor HDD password has been assigned, you must know this password.
Pay attention to the additional safety notes for devices with radio compo nents
provided in the "Safety/Regulations" manual.
Details on using wireless LAN can be found in the online help system
included in the wireless LAN software.
You can find more information on how to use Bluetooth on the CD you
received with y our Bluetooth softw are.
You c an obtain mo re information on 4G from your service provider.
62 Fujitsu
To Next Page
Loading...
