Connecting external devices
Connecting an external monitor
The port replicator, available as an option for your notebook, offers
you a DVI port and a DisplayPort.
An analog monitor is connected to the analog VGA monitor port, a digital monitor to the DVI-I
monitor port of the port replicator. Screen output is limited to a maximum of two screens at an y
one time (see "
Key combinations", Page 43, section "Toggle output screen").
MonitorVG Aconnection socketScreenportMonito rp ort
Digital DVI monit
or p ort
Analog VGA monitor port
► Switch off the notebook and the external monitor.
► Plug the data cable of th e external mon itor into the monitor port.
► First switch on the external monitor and then the notebook.
You can also switch back and forth bet ween the external monitor and the notebook’s
LCD monitor, see chapter "
Key combinations", Page 43.
You can display the same p icture on the external monitor and the
notebook LCD screen simultaneously.
78 Fujitsu
To Next Page
Loading...
