Fujitsu Lifebook T900 - Miscellaneous Configurations Submenu of the Advanced Menu

16
LifeBook T Series BIOS
Miscellaneous Configurations Submenu of the Advanced Menu
The Miscellaneous Configurations submenu provides options for enabling or disabling the power button and the
Wake Up On LAN feature, and setting the volume and video memory size.
Figure 11. Miscellaneous Configurations Submenu
Table 11: Fields, Options and Defaults for the Miscellaneous Configurations Submenu of Advanced Menu
Menu Field Options Default Description
Power Button:
■
Disabled
■
Power Off
[Disabled] Selecting Disabled disables the power button. Selecting Power Off
allows you to turn off system power with the power button.
Wake up on LAN:
■
Disabled
■
Enabled
[Disabled] Enabled allows the system to wake up when the internal LAN device
receives a specific signal while in power-off state. Selecting Disabled
disables this feature.
On Battery:
■
Disabled
■
Enabled
[Enabled] When disabled, Wake Up On LAN is only enabled when there is an
AC adapter connected.
Force LAN Boot:
■
Disabled
■
Enabled
[Disabled] This feature is active only when “Wake up on LAN” is enabled. When
enabled, in the event of a system wake-up on LAN, the system will try
to first boot from the LAN before attempting to boot from any other
device, regardless of the BIOS boot priority settings or disabling of the
Preboot Execution Environment.
Resume on LAN:
■
On AC mode only
■
Always Enabled
[Always
Enabled]
When “On AC mode only” is selected, Wake Up On LAN from
standby/hibernate states is only enabled when AC adapter connected.
Auto Save To Disk:
■
Off
■
On
[On] Turns the Auto Save To Disk feature on and off. When it it enabled,
when a battery in Suspend mode reaches low battery state, its state
will be saved to disk and the system will power off.
Volume Setting:
■
Off
■
Minimum
■
Middle
■
Maximum
[Middle] Selects the initial volume setting for the system.
Hardware Power
Management:
■
Disabled
■
Enabled
[Enabled] Allows you to enable or disable the Hardware Power Management
technology.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Item Specific Help
Configures the power
button.
*ACPI OS ignores this
setting.
Miscellaneous Configurations
Power Button:
Wake up on LAN:
On Battery: [Enabled]
Force LAN Boot:
Resume on LAN:
Auto Save To Disk:
Volume Setting:
Hardware Power Management:
[Disabled]
[Disabled]
[Disabled]
[Always Enabled]
[On]
[Middle]
[Enabled]
Phoenix SecureCore(tm) Setup Utility
Info System Advanced Security Boot Exit