7
Drive0 Submenu of the System Menu
The Drive0 submenu identifies what ATA devices are installed.
Figure 3. Drive0 Master Submenu
Table 3: Fields, Options and Defaults for the Drive0 Submenu of the System Menu
Menu Field Options Default Description
Drive0:
■
Disabled
■
Enabled
[Enabled] Allows you to enable or disable the hard drive 0.
Type: ---
--- Information only: Displays the type of hard disk installed as drive 0.
Model:
---
--- Information only: Displays the model of hard disk installed as drive 0.
Capacity
---
--- Information only: Displays the capacity of hard disk installed as drive 0.
Phoenix SecureCore(tm) Setup Utility
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
Item Specific Help
[Disabled]
The drive is disabled.
[Enabled]
The drive is enabled.
Drive0 [FUJITSU MHY2080BH]
Drive0: [Enabled]
Type: Hard Disk
Model: FUJITSU MHY2080BH
Capacity: 80GB
(80,026,361,856 Bytes)
▲
Info System Advanced Security Boot Exit
System Menu
To Next Page
Loading...
