Fujitsu LifeBook T901 - Calibrating the Pen

Working with the notebook
Setting the pen
Operating system Menu
Windows X P You can access various pen settings under Fujitsu Pen Settings or
Tablet and Pen Settings in the Control Panel (for instance, the pressure
sens itivity).
Windows 7
Under Hardware and Sound – Pen and Input Devices in the Control Panel
you c an change various settings for the pen (assignment and function of
the pen button).
Calibrat ing the pen
Before using the pen for the first time, you should calibrate it so that the cursor follows th e
movements of the pen as accurately a s p ossible. You should also always repeat the calibration
if the co-ordination between the pen and cursor movement deteriorates.
Please note: There are separate calibration programs available for calibrating
the stylus pen and for calibrating finger-base d operation. In each case, use the
calibration tool described in the supplementary sheet. Do not use the calibration
tool for the stylus pen to calibrate fi nger-based operation.
Operating system Menu
Windows X P
To calibrate, run the Tablet and Pen Settings function in the Cont rol Panel.
You need to calibrate both portrait and landscape formats.
Windows 7
To calibrate, run the Hardware and Sound / Tablet PC Settings function in the
Control P anel. You need to calibrate both portrait and landscape formats.
36 Fujitsu Technology Solutions