Fujitsu LIFEBOOK T904 - Password Protection for Booting the Operating System

Security functions
Changing the supervisor HDD password or user HDD password
You can only change the supervisor H DD password when you have logged into the
BIOS Setup Utility with the supervisor HDD password.
PasswordSupervisorHDDpasswordUserHDDpassword
► Start the BIO S Setup Utility and go to the Security menu.
► W hen changing the password, proceed exactly a s when assigning a password.
Removing passwords
To remove a password (without setting a new password) perform the following steps:
PasswordSupervisorpasswordUserpassword
► Start the BIO S Setup Utility and go to the Security menu.
► Highlight the Set Supervisor Password or Set User Password field and pre ss the Enter key.

You will be requested to enter the current password by the Enter Current Password prompt.
Enter New P a ssword will app ear and you will be requested to enter a new password.
► Press the Enter key twice at this request.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the Enter k ey.

The notebook will now rebo ot with the password re moved.
With the supervisor HDD password, you simultaneou sly d eactivate the u ser password.
Password protection for booting the operatin g system
You can also pre
vent booting of the operating system with the supervisor
HDD passw ord yo
uhavesetintheBIO S Setup Utility (s ee section "
Assig ning
the superviso
r and use r HDD passwords" , Pa ge 66).
Operating system
Activating system protection
► Start the BIO S Setup Utility and go to the Security menu.
Operatings ystem
► Select the PasswordonBootoption and press the Enter key.
► Select the option you require (Disabled, First Boot or Every Boot) and press the enter key
► Select the Save Changes & Exit option under Exit.

The notebook will reboot. You will be prompted to enter your password
(the supervisor HDD password).
Deactivating system protection
► Start the BIO S Setup Utility and go to the Security menu.
Operatings ystem
► Select the PasswordonBootoption and press the Enter key.
► Select the Disabled option and p ress the Enter key.

If you do not want to change any other settings, y ou can exit BIOS Setup Utility.
► Select the Save Changes & Exit option under Exit.

The notebook will reboot. The system is no longer password-protected.
Fujitsu 67