Settings in BIOS Setup Utility
Exiting BIOS Setup Utility
BIOSSetupUtility
You need to select the desired option in the Exit menu and activate it by pressing the Enter key:
Exit Saving Changes - save ch
anges and exit B IOS Setup Utility
► To save the current menu settings and exit the BIO S Setup Utility, select Exit Saving Changes and Yes.
The notebook is rebooted
and the new s ettings come into effect.
Exit Discarding Changes - Reject changes and
exit BIOS Setup Utility
► To discard the changes, select Exit Discarding Changes and Yes.
The settings in place when BIOS Setup Utility was called remain effective. BIOS
Setup U tility is terminated and the notebook is r eboote d.
Load Setup Defaul
ts – load default values
► To copy the standard ent ries for all menus of the BIOS Set up Utility,
choose Load Setup Defaults and Yes.
Discard Changes - Discard Chan ges without
exiting BIOS Setup Utility
► To discard the changes you have m ad e, select D iscard Changes and Yes.
The settings in place when BIOS Setup Util ity was called remain effective.
You can now make additional settings in the BIOS Setup Utility.
► IfyouwanttoexittheBIOS Setup Utility with these settings, se lect Exit Saving Changes and Yes.
Save Chan
ges - save changes without exiting
the BIOS Setup Utility
► To save the changes, select Save C hanges and Yes.
The changes are saved. You can now make additional se ttings in the BIOS Setup Utility.
► If you want to exit BIO S Setup Utility with these settings, c hoose Exit Saving Changes and Yes.
Save changes and power off
► To save the c hange s and switch off your device, select Save Changes and Power Off and Yes.
The changes are saved. Your device is shut down.
80 Fujitsu
To Next Page
Loading...
