Working with t he notebook
Hot key Description
Bilingual keyboard:
Create a scrensh ot
With this hot ke y, a screenshot of the current screen image is created and
stored in the clipboard.
Bilingual keyboard:
Enable/Disable virtual number keys
This hot key enables and disables the v irtual number keys. Those characters
are issued, which are located at the top right corner of the r espective keys.
Function keys
The function keys are the icons on the bottom of the keys.
The function keys are numbered from
F1
up to
F12
.
The function keys serve as short-cut key functions and activate operating
system and/or software functions.
Regardless of the F Lock setting, the fun ction keys are always the primary key fu nctionality:
• until Windows is loaded (after rebooting the system).
Then the primary keys functionality are mainta ined from the last F Lock s etting
prior to reboot (see chapter "
F Lock settings", Page 35 ).
• when accessing: If
Fn
+
F2
or
Fn
+
F12
are presse d during boo t, the BIOS m enu
is not started. You must press the
F2
or
F12
key alone.
F Lock settings
By pressing the
F Lock
key, yo u may lock either the hot keys or function keys as the
primary or secondary key functionality for the top row of keys.
F Lock is set to off by default out of factory.
► Press
Fn
+
Esc
to switch F Lock on or off.
If F Lock is set on, it stays on like the
Caps Lock
key.
When switching the F Lock settings, the primary or secondary k ey functionality changes as follows:
Status
Hot key Function key
FLockisoff(FLockindicatoris
not illuminated)
Hot keys become the primary
keys:
► Press the h ot key alone.
Function keys become the
secondary keys:
► Press
Fn
+ function key.
F Lock is o n (F Lock indicator
is illuminated)
Hot keys become the secondary
keys:
► Press
Fn
+ hot key.
Function keys become the
primary k eys:
► Press the function key
alone.
Fujitsu 35
To Next Page
Loading...
