Fujitsu LIFEBOOK U7311 - Settings in BIOS Setup Utility; Starting the BIOS Setup Utility

Settings in BIOS Setup Utility
Settings in BIOS Setup Utility
BIOSSetupUtilitySystemsettings,BIOSSetupUtilityConfiguration,BIOS SetupUtilitySetupSystemcon figurationHardwareconfiguration
The BIOS S etup Utility allows you to set the system functions and the hardware
configuration for the notebook.
When it is delivered, the notebook is set to factory default settings. You c an
change these settings in BIOS Setup Utility. Any cha nges you make take effect as
soon as you save and exit the BIOS Setup Utility.
The BIOS Setu p U tility progra m contains the following menus:
Info
Displays information relating to the BIO S, processor and notebook
System
Advanced system settings
Advanced
Configuration of various hardware components, such as mo use , keyboard,
processor
Security
Password settings and security functions
Boot
Configuration of the start-up sequence
Exit
Exits the BIOS Setup Utility
Starting the BIOS Setup Utility
► Start the devic
e (switch off/on or reboot the Operating System).
BIOSSetupUtility

Depending on the setting for Fast Boot in the BIOS Setup Utility the following display,
if applicable, appears on the screen on start-up:
<F2> BIOS Set
up <F12> Boot Menu
► Press the fu
nction key
F2
.
► If a passw ord has been assigned, enter the password and press the Enter key.
If you have forgotten th e password, contact your system administrator
or contact our customer service centre.
The BIOS S etu p Utility starts.
Fujitsu 63