Working with the no tebook
Speaker a nd microphones
MicrophoneSpeakerSubwooferVolum ec ontro l
You can find information about the exact position of speakers and microphones
in chap ter "
Ports and controls", Page 10.
Please refer to chapter "
Key combinations" , Page 25 for information on setting the volume
and also enabling/disabling the speakers using key combinations.
When you connect headphones or external speaker s, the built-in speakers are disabled.
You can find information on connecting headphones and a microp hone in
chapter "
Connecting external devices", Page 50.
Wireless LAN/Bluetooth components
The installation of wireless components not approved by Fujitsu will
invalidate the certifications issued for this device.
Switching the wireless components on and off
► Press the button to sta rt the WirelessSelector.
The wireless indicator w ill illuminate when one or more w ireless components are switched on.
If yo u switch off the wireless components, the wireless LAN antenna an d
the Bluetooth module will also be switched off.
You can act ivate and deactivate the installed wireless components
individually using the WirelessSelector program
Pay attention to the additional safety notes f or devices with wireless components
provided in the "Safety/Regulatio ns" manua l.
Details on using a wireless LAN can be found in the online help system
included in the wireless LAN software.
You can find more information on how to use Bluetooth on the CD you
received with your Bluetooth software.
Configuring WLAN access
• Requirement: A WLAN is available and you have the necessary access data to hand.
Informationonconfiguring WLAN access can be found in the
documentation for your op erating s ystem.
38 Fujitsu
To Next Page
Loading...
