Connecting external devices
USB connection with charging function (USB Type-C)
USBconnectionwithchargingfunction(USBType-C)
At this USB Type-C port, you can charge a connected USB device or operate
devices without additional power supply.
This is also possible with connected notebook computers by going to the BIOS Setup Utility
under the menu Advanced > Miscellaneous Configurations and activating the function USB Type-C
Power Delivery on System-Off. Instructions for how to call up and operate the BIOS Setup
Utility can be found in section
"
Settings in BIOS Setup Utility", Page 79.
USB devices are hot-pluggable. This means you can connect and disconnect
the cables of USB devices while the system is running.
Additional information can be found in the documentation for the USB devices.
+
► Connect the data cable to the
external device.
► Connect the data cable to a USB port
(USB Type-C) of the notebook.
Fujitsu 65
To Next Page
Loading...
