Important notes
Important notes
ImportantnotesNotes
This chapter contains essential safety information which mu st be followed
when working with your notebook. Other notes also provide useful information
which will help you with your notebook.
Safety notes
SafetynotesNotes
Please follow the safety notes provided in the "Safety/R egulations" manual
as well as the safety notes given below.
Please pay special attention to the sections in the manual marked
with th e symbol on the left.
When connecting and disconnecting cab les, observe the relevant
notes in this operating m anual.
Read the information on the ambient conditions in the "
Technical data",
Page 56 and "First-time setup of your device", Page 14 be fore preparing y our
notebook for use and switching it on for the first time.
When cleaning the device, please observe the relevant notes in the
section "
Clean ing the notebook", Page 1 3.
Pay attention to the additional safety notes for devices with rad io components
provided in the "Safety/Regulations" manual.
Please refer to the notes in the chapter "
Removing and installing
comp onents during servicing", Page 46.
This notebook
complies w ith the relevant sa fety regulations fo r data processing
equipment. I
f you have questions about using your notebook in a particular area,
please conta
ct your sales o utlet or our Hotline/Se rvice Desk.
Additional safety notes for devices with
radio components
Radiocom pon ent:WirelessLAN:Bluetooth,safetynotes
If a radio component (Wire less LAN, Bluetooth, UMTS) is integrated in your notebook, you
must be sure to observe the following safety notes when using your notebook:
• Switch off the radio components when you are in an aircraft or driving in a car.
• Switch off the radio components when you are in a hospital, an operating room or n ear a medica l
electronics system. The transmitted r adio waves can impair the opera tion of medical devices.
• Switch off the radio comp onents when yo u let the device get near flammable
gases or into hazardous environments (e.g. petrol station, paintshops), as the
transmitted radio waves can cause an explosion or a fire.
For information on how to switch radio components on and off, see chapter
"
Switching the wireless components on and off", Pag e 32.
Fujitsu Technology Solutions 11
To Next Page
Loading...
